|
|
|
|
|
The Bolero is a two piece fiberglass golf cart body kit that
is designed to fit the Club Car, E-Z-GO or Yamaha chassis.
(You must specify the chassis you will be mounting the kit
on to.) This cart is designed to be a two 2 person cart while
golfing or a 4 person cart when the removable bag holders
are removed.
This body comes with a fully automotive type wiring harness
with switches, flashers, combination switch, and provisions
for two hot wires for a music system and cigarette lighter.
The circuit is controlled with 6 individual fuses, set in
a single automotive type fuse box. A twin set of wind tone
horns are included.
|
All body parts do not come painted
but are primered and ready for paint.
|
The front cowl
houses a storage box under the hood which is electrically
operated by a switch that is located in the lockable glove
box on the dash. All switches have aluminum labels including
the forward reverse switch.
Lighting
for the front cowl is provided by two dual filament lamps
and has directional indicators and horn. The horns, lights,
and indicators, are all controlled by a single stalk automotive
type combination switch which is wired into the wiring harness.
|
 |
The rear
body has dual cluster type tail lights with running lights,
brake lights, and directional indicator lights. Additional
wires are provided to connect the brake switch and to power
up your electrical system. PLEASE NOTE ALL IS WIRED FOR
12 VOLTS.
|
|
Plush, fully upholstered seats in Art
Leather are provided with a bench type
front seat and two individual back
rests. A set of fully retractable seat
belts are provided for both front seats.
The Rear seats are bench type and each
seat has a static type seat belt. |
 |
Rich, plush
woolen carpets are provided
with special rubber backing
(for weather protection),
are included for the front. Your
kit comes with two removable golf bag holders with
all necessary fittings. Simply remover the golf bag
holders to make your cart a 4-passenger cart.
This kit is loaded with many Extra's. To name a few: A lockable glove box on the passengers side, open glove box on the driver side, custom hardtop, audio radio console, side mirrors, a set of black powder coated steel frames, stainless steel hardware (nuts, bolts and washers) for exterior mounting, a superbly designed variable-fold down windshield and now the upper windshield to make it a complete front windshield.
|
The Bolero requires less than 12 hrs to have up and going. That includes the time for removing the old body, assembling the new body, mounting the body and adjusting all its features to meet your needs.
|
Bolero EZGO
Bracket |
A special
booklet-type instruction manual that is complete with photos,
guides even the first time builder through all the stages
of assembly. A complete hardware kit is included and ensures
that no other fasteners or hardware is required. (To top
it off, a set of tools are provided.)
THE VERY
BEST PART: Prior to your receiving your kit, all body parts
(and all items), have been pre-drilled and pre-fitted at
the factory. To assemble all you have to do is to take off
the original body pieces and bolt on our kit!
The Bolero will be enjoyed by people who want a different look in their golf cart. With a cart like this you will look good on road as well as off road. (Note: not recommended for heavy off road use.)
|
|
“ As better FRP products are built, B&B will be
building them.”
|
|
|
